AS602 指紋辨識晶片

支援FPC1011F3指紋感應器

SHARE: 

Feature

  • 搭配FPC1011F3-安全性高、性能優異的指紋辨識晶片
  • 512枚指紋容量
  • 支援USB、UART介面
  • 具備硬體加解密功能

Spec

 

參數及數值

支援指紋感應器

FPC1011F3

指紋容量

512 枚指紋

辨假率

< 0.001% (@ 安全度設定為 3)

拒真率

< 1% (@ 安全度設定為 3)

比對模式

1:N 及 1:1 verification

安全度選項

1-5 selectable, default: 3

回應時間

< 1 sec (1:500, average time)

支援介面

USB1.1 or UART (3.3V TTL logic)

供應電壓

DC3.3V

工作環境

溫度: -30°C ~ 75 °C,溼度: 40% ~ 85% RH

Cordis 5 +" 32-bit RISC processor core

● 16/32-bit mixed instruction set

● All instructions are single-cycle and can be implemented by conditions

● Fast interrupt response

● Dedicated Multi-divinstruction of large integers

● 5-stage pipelines

● Frequency is configurative, up to 120MHz

● Unique security design to secure codes and data

● High performance Cache

● 8KB instruction Cache

● 4KB data Cache

● Frequently-used DSP instruction set

● Synochip specific instructions

● Support internal Flash debug

● Standard IEEE1149.1 JTAG debugging interface

Storage management and unit protection

● Support multi-level hardware-based protection mechanisms

● JTAG-lock to prevent unauthorized users from reading

● 1MB FLASH for thestorage of seldom changing data like program, library etc.

● 128KB SRAM, to satisfy the computing of large volume of data

● 4K-bit OTP Flash for the storage of customer’s proprietary equipment information, etc.

Security features

● Key size: Support1024/2048 bit RSA operations; Sign speed: 1024 bit RSA can reach 60 times/s@108MHz

● High speedsymmetric encryption algorithm engine

● TRNG, FIPS 140-2 certificate

● Security detection and prevention unit

● Storage fegion encryption

● Bus encryption

● Secure optimized layout

● Internal POR (Power-on Reset)

● Unique SN for each chip

● Specified domain is open for chip configuration

Communication Interface

● USB interface: support USB2.0 12Mbps full speed

● ISO7816 smart card interface: compatible with ISO7816-3 standard, support both synchronous and asynchronous card

● USART interface: can be configured as SPI, UART or I2C

● APC (Asynchronous parallel controller)

● 51 GPIOs, 18 GPIOs of them support external interrupt

● 4-channels PWM

Electrical features

● Built-in oscillator controller and PLL; externally connect to 12MHz crystal

● Power consumption less than 150mW (3.3V@120MHz)

● Support low-power consumption mode

● Package: LQFP80

● Power supply: 1.8V/3.3V

● Temperature: -40℃~85℃

● ESD: ±2KV

Applications

● USB KEY/Token

● Encryption Flashdrive

● Fingerprint USB KEY

● Desktop encryption machine

● Desktop VPN

● High performance reader

● Handheld POS machine                      

● Encryption board

SDK

Support

Technical Team

檔案下載