AS606 指紋辨識晶片

支援FPC1020AM指紋感應器

SHARE: 

Feature

  • 搭配FPC1020AM-安全性高、性能優異的指紋辨識晶片
  • 512枚指紋容量
  • 支援USB、UART介面
  • 具備硬體加解密功能

Spec

 

參數及數值

支援指紋感應器

FPC1020AM

指紋容量

512 枚指紋

辨假率

< 0.001% (@ 安全度設定為 3)

拒真率

< 1% (@ 安全度設定為 3)

比對模式

1:N 及 1:1 verification

安全度選項

1-5 selectable, default: 3

回應時間

< 1 sec (1:500, average time)

支援介面

USB1.1 or UART (3.3V TTL logic)

供應電壓

DC3.3V

工作環境

溫度: -30°C ~ 75 °C,溼度: 40% ~ 85% RH

 

Cordis 5+ RISC processor core

● 5-stage pipelines, branch prediction

● 4KB instruction Cache and 1KB data Cache

● JTAG debugging interface

● Normalize, Swap instruction

● Dual 16 MAC, finishes 32x16counts of operations in a single cycle

● 32-bit timers x 4, support WDT and password protection

● Various unique Synochip hardware accelerators, including fingerprint algorithm accelerator (FPA)

On-chip memory

● ROM: 16KB (users can not program, but only support boot and ISP downloading functions)

● SRAM: 128KB, including 112KB for BVCI interface, supporting Cache, 2-cycle access; and 16KB for DCCM interface, single cycle access

● OTP: 16KB, supporting running programs

● FLASH: built-in 1MB Flash

Extension parallel interface

● APC: 1-bit chip selection, 8-bit data bus

Peripheral interface

● USB DEVICE: PHY integration, support full-speed and low-speed modes

● USB HOST: PHY integration, support full-speed and low-speed modes

● LOCSC: optical CMOS sensor interface, automatic image acquisition, supports frequency up to 100M to the maximum

● CLKOUT x 2: enable system clock’s 1~65535 frequency dividing output

● SDI x 2: SD card master control interface, support SD2.0 protocol

● VPWM: PWM signal output of voice signal, support 8/16-bit audio data

● ADC: 10-bit single channel SAR analog digital converter, speed rate: 1M/200K SPS

● UART x 2, SPI x 2, I2C x 1

● ECCP: support 4-channel capturing, 4-channel comparison and 8-channel PMW output with dead-time control

● IDCC: automatic detection of RFID card number, 125K clock output by CLKOUT or simulated bynormal IO

● DMA: 4-channel DMA controller, support 1, 2 and 4-byte width and burst mode transmission

● GPIO: up to 42 ports, partial GPIO ports are compatible with 5V and each GPIO has function of interrupt

Security features

● 16KB executable-only OTPmemory to protect code security

● Unique serial number

● JTAG LOCK

Other features

● In-chip integrates 1.2VLDO, drive current 100mA, and can offer 1.2V power supply for chip core

● On-chip POR, PDR

● In-chip PLL, supportdynamic frequency switchover

● Support sleeping mode and interrupt wakeup function

SDK

Support

Technical Team

檔案下載